Description

100% BRAND NEW

Note:

Kindly clean the Tester Probe with TapWater and Cloth after every use

Introduction:
This tester can be used as a digital brake fluid tester suitable for
determining brake fluid quality. Developed for professional use in automotive
repair shops. The quality of the brake fluid can be tested on five LEDs in terms
of “Percentage of water in the brake fluid.

Features: 

Brake Fluid Tester LED Moisture Water TesterPen
Quality it tested and indicated on five LEDs in terms of per cent of water in
the brake fluid.
Developed for professional use inautomotive repair shops
Test the quality of brake fluid within seconds
Calibrated for DOT3 & DOT4 BrakeFluids (most cars production after 2006)
To Check Fluid Quality:
Press the button for Power ON, Green LED will light up. Insert the tester into
reservoir for one second then the test result will be indicated by LEDs. The tester
will automatically power off after 12 seconds of inactivity.

Indicator Lights for Water Moisture Testing:
Green: 0% Water. Battery OK, no water contained in the brake fluid.
Yellow: Less than 1% Water. Above Standard OK to Use
Yellow/Yellow: 2% Water. Still OK to Use.
Yellow/Yellow/Red: 3% of Water. Thebrake fluid should be changed.
Yellow/Yellow/Red/Red: At least 4% of Water. The brake fluid must be changed urgently!

Specifications:

Length: 15 x 1.5cm (L x W)
Requires: 1x AAA/1.5V Battery (Not Included)
Material: Plastic
Working Temperature: 0C -50C
Humidity: 0-85%

Package Contents:

Brake Fluid Tester LED Moisture Water Tester Pen